Feed Rate

All info relating to the Denford Compact 1000 and Compact 1000 Pro small routing machines

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
colellir
Posts: 4
Joined: Fri 30 Sep , 2011 12:29 pm

Feed Rate

Post by colellir » Tue 05 Dec , 2017 18:55 pm

Compact 1000 here. When I'm ready to mill an FI car, the feed indicates a RED X on the white glove. The router turns on but does not move.??? Any advice? Thank you.

Martin
CNC Guru
CNC Guru
Posts: 1595
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Feed Rate

Post by Martin » Thu 07 Dec , 2017 13:48 pm

You should have a feedrate override knob above the emergency stop which should be set to 100% ( Between 2 & 3 o'clock).

colellir
Posts: 4
Joined: Fri 30 Sep , 2011 12:29 pm

Re: Feed Rate

Post by colellir » Thu 07 Dec , 2017 16:14 pm

Thanks for your advice. I set the feed rate to 100% but still have the Red X. I tried jogging the x, y, z axis. The router does not move, but the axis counters do.

Post Reply