Duty Cycle on Sindle Motor of PCB ENGRAVER and Floating Head

Anything to do with our PCB / Engraving machine or software

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1286
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Duty Cycle on Sindle Motor of PCB ENGRAVER and Floating Head

Post by Steve » Mon 04 Feb , 2013 17:38 pm

The motor on the PCB engraver and the floating head have a 50% duty cycle with a 20min max on time.

It is ideal to have a second motor if long production runs are envisaged. This can be used as a toolchange so tracks are cut with one motor and the holes drilled with another. This also speeds up the toolchange procedure.

Attached is the page from the manual of the PCB engraver.
Attachments
PCB Engraver Operator Manual.pdf
(71.2 KiB) Downloaded 338 times

Post Reply