2D Design V1 + Denford Extensions

A forum for issues relating to the use of TechSoft 2D design and Denford CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
richedgar
Posts: 1
Joined: Wed 18 Sep , 2013 13:40 pm

2D Design V1 + Denford Extensions

Post by richedgar » Wed 18 Sep , 2013 13:57 pm

Hi,

Is there a way of telling if the installed license for 2D Design v1 includes the Denford Extensions? We have a license card for 2D Design the says with Denford and the serial numbers match between this card and the installed licence, we have lost the original license floppy disk so do not know if the sup file we installed is the basic one or the one with the extensions.

Thanks.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: 2D Design V1 + Denford Extensions

Post by Martin » Wed 18 Sep , 2013 17:07 pm

As far as I know if it's the wrong licence then no Denford machines will be displayed in the plotting device list.

You will also need the Denford Extensions for 2D Design as well.

Post Reply