Micromill and Techsoft 2D Design

A forum for issues relating to the use of TechSoft 2D design and Denford CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
mmjkaejec
Posts: 2
Joined: Thu 21 Feb , 2008 20:14 pm
Location: Warwickshire

Micromill and Techsoft 2D Design

Post by mmjkaejec » Thu 21 Feb , 2008 20:24 pm

How do I add my micromill to the CNC outputs on my 2 D Design software. I have down loaded the Denford extension but dont know how to use it. The micromill has been gathering dust for somtime. Is it worth upgrading and how much will that cost? it is a 2001 version.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Fri 22 Feb , 2008 9:53 am

Just install the Denford Extensions from what you have downloaded

In Techsoft 2D if you go to FILE > PLOT Arrow down in PLOTTING DEVICE, scroll up you should see

Denford Micromill (Link)
Denford Micromill 2000 (Link)

E mail your Micromill Serial No to service@denford.co.uk and we will be in touch

mmjkaejec
Posts: 2
Joined: Thu 21 Feb , 2008 20:14 pm
Location: Warwickshire

Micromill

Post by mmjkaejec » Fri 22 Feb , 2008 11:56 am

Tried that but still cant see the Denford micromill. I have E mailed the seriel number. :cry:

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Fri 22 Feb , 2008 12:05 pm

Use help in Techsoft 2D and search for Denford and this gives you information ans paths.

Are you logging in as an Administrator or a User on your PC ?

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Fri 22 Feb , 2008 12:56 pm

You also need a Techsoft update.

2. Techsoft 2D 3-1/2" registration floppy with EXTENSION DENFORD written on it

viewtopic.php?t=11

Post Reply