SRDCN Tool - Radius tool D= 6 mm

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
mini1973
Posts: 2
Joined: Thu 24 Apr , 2014 10:53 am
Hardware/Software: Denford Starturn 8 / Quickturn 2D

SRDCN Tool - Radius tool D= 6 mm

Post by mini1973 » Thu 24 Apr , 2014 10:58 am

Hello,
i bought a Starturn 8 ín ebay, great machine and i want to use the machine for tooling Aluminium/Plastic and Wood!
I only want to use a single tool a SRDCN Tool / D= 6mm .
I try to define a neutral tool, but the Software says - no Forward roughing tool defined/enabled.

i think i am doing something wrong, help would be great!

Best regards from the sunny vienna

Post Reply