Manuals

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
GCCCAD
Posts: 1
Joined: Fri 30 Mar , 2012 10:05 am

Manuals

Post by GCCCAD » Thu 16 Aug , 2012 17:35 pm

Are manuals available for QuickTurn 2D 1.14? If so, where? Thanks!

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Manuals

Post by Denford Admin » Mon 20 Aug , 2012 10:03 am

At present there is only the Quickstart guide available from the autorun menu on the CD or from inside the software (Help > Tutorials > QuickTurn QuickStart)

Post Reply