QuickTURN2D v1.12 released 16th Mar 2012
Posted: Fri 16 Mar , 2012 14:52 pm
//v1.11 - Rotation Animation of 3D window
//v1.11 - Fix to thread display if thread tool not defined or has a angle less than 10 degrees
//v1.11 - updates to shared machine file stuff have been made for VR turning 6, wizard updated etc...
// - fixed a problem with thread adjustment allow on screen option - kept turning itself off
//v1.11 - fixes to simulation and turning tips. Tips not being drawn correctly and slight discrepancies caused simulation to show tools flattening off the backs of arcs - especially if tool had a shallow clearance angle
//v1.11 - Added option to only leave finishing amount on in X (diameter) - helps issues with hard materials, and the tool coming up to a face full-on when doing finishing cut
//v1.11 - Updated to OpengGL stuff
//v1.11 - changes made to DXF import joining lines procedure - needs testing still
//v1.11 - changes to load or create default mml file - location of it was hardcoded and didn't work in vista or win7
//v1.11 - icon changed to look better on win7 / vista
//v1.12 - tests for windows 7 and changes to way seckey gets installed (new app SecKeyHelp done)
//v1.12 - any files installed into commonappdata that want to be writable need copying into localappdata
//v1.12 - fix to arcs going wrong way on roughing but ok on finishing -
// - the same fix may need implementing for arcs greater than +180 ?
//v1.12 - improvements to internal arc editing
//v1.12 - made the default .fnl (post) output directory the same as the .LCM load or saved directory
//v1.12 - changed default material set to be Microtun_basic so turn270 users are forced to select theirs - hopefully stopping microturn users from using settings too harsh for their machine
Find the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads
//v1.11 - Fix to thread display if thread tool not defined or has a angle less than 10 degrees
//v1.11 - updates to shared machine file stuff have been made for VR turning 6, wizard updated etc...
// - fixed a problem with thread adjustment allow on screen option - kept turning itself off
//v1.11 - fixes to simulation and turning tips. Tips not being drawn correctly and slight discrepancies caused simulation to show tools flattening off the backs of arcs - especially if tool had a shallow clearance angle
//v1.11 - Added option to only leave finishing amount on in X (diameter) - helps issues with hard materials, and the tool coming up to a face full-on when doing finishing cut
//v1.11 - Updated to OpengGL stuff
//v1.11 - changes made to DXF import joining lines procedure - needs testing still
//v1.11 - changes to load or create default mml file - location of it was hardcoded and didn't work in vista or win7
//v1.11 - icon changed to look better on win7 / vista
//v1.12 - tests for windows 7 and changes to way seckey gets installed (new app SecKeyHelp done)
//v1.12 - any files installed into commonappdata that want to be writable need copying into localappdata
//v1.12 - fix to arcs going wrong way on roughing but ok on finishing -
// - the same fix may need implementing for arcs greater than +180 ?
//v1.12 - improvements to internal arc editing
//v1.12 - made the default .fnl (post) output directory the same as the .LCM load or saved directory
//v1.12 - changed default material set to be Microtun_basic so turn270 users are forced to select theirs - hopefully stopping microturn users from using settings too harsh for their machine
Find the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads