Paths to MML Tooling Files

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Paths to MML Tooling Files

Post by Denford Admin » Tue 08 Jun , 2010 8:52 am

A customer is getting this error from QuickTurn 2D Design:
Cannot create file"C:\Documents and Settings\All Users\Application Data\Denford\Machines\QuickTurn_MML". The file cannot be accessed by the system.
Either the software has not installed correctly, or the establishment has network security in place which is preventing access to the All Users folder.
From a default installation, this folder should contain the following files:
  • Microturn_Basic_Tooling.MML
  • Microturn_Recommended_Tooling.MML
  • QuickTURN_Default.MML
If it doesn't contain these files or they are empty, then the system/network administrator needs to check why the software did not install correctly.

If the folder is not accessible for Read+Write from the student login, then it needs making so.

Post Reply