QuickTURN v1.6 released 3rd Sept 2009

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN v1.6 released 3rd Sept 2009

Post by Denford Admin » Thu 03 Sep , 2009 15:09 pm

Check for the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads

updates:
//v1.6 - lines that start and end at the same position are ignored when loading an .lcm in and when drawing
//v1.6 - Internal/External status panel at the bottom can be clicked to change Internal/External drawing mode
//v1.6 - Changed the property editor to a new docking component to get it to resize properly
//v1.6 - Made demo mode 3D view easier to see (it was mainly hidden by the unlicensed message previously)

Post Reply