Check for the latest version here:
http://www.website.denford.ltd.uk/suppo ... -downloads
NB: VR Turning v1.21 or higher is required for the QuickTURN threading cycles to work properly on a Denford machine.
A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.
1 post • Page 1 of 1
- Denford Admin
- Site Admin
- Posts: 3587
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
- Location: Sunny Brighouse