QuickTURN2D v1.29 released 11th April 2017

A place to talk about QuickTURN 2D Design - our first Lathe CAD CAM software for a very long time.

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3586
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickTURN2D v1.29 released 11th April 2017

Post by Denford Admin » Tue 11 Apr , 2017 11:54 am

//v1.29 - 11th April 2017 - The internal cut may now extend out of the back of the external cut and be modified further. There is also a bugfix so that the start of the internal line can be modified.

Check here to download the latest version of all software:
http://www.denfordata.com/downloads/Qui ... _v1.23.zip

TDIPower
CNC Guru
CNC Guru
Posts: 334
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Roland CAMM3 PNC3000 (For Sale)
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: QuickTURN2D v1.29 released 11th April 2017

Post by TDIPower » Tue 11 Apr , 2017 18:48 pm

The link posted is titled as V1.23 is this correct?

Is there any news on a more informative instruction manual than the quick guide (to the same standard as LatheCAM Designer) ?

Cheers

Post Reply