Solidworks CAM post processor
Posted: Wed 20 Mar , 2019 10:52 am
Hi,
We have a Router 2600 Pro and we use Solidworks and the CAM add in. In the CAM add in I need to select the correct post processor, does anyone know which is correct for this machine? The standard list available to me in Solidworks is listed below. Or if anyone has the correct .ctl file they could send me, that would be great.
yasnac.ctl"
acramatic-2100.ctl"
allenbradley-8400.ctl"
anilam 1100.ctl"
anilam_6000m.ctl"
biesse-rover23.ctl"
bostomatic.ctl"
brother-c720.ctl"
centurion-6.ctl"
dialog3.ctl"
dialog4.ctl"
fadalcnc.ctl"
fagor8070.ctl"
fanuc10m.ctl"
fanuc11m.ctl"
fanuc16m.ctl"
fanucom.ctl"
haas_vf3.ctl"
heidenhain_itnc426.ctl"
hh_itnc_530.ctl"
hurcokm3.ctl"
mach_iii.ctl"
mach_iii_g54.ctl"
mazakm32.ctl"
mazak-matrix-3ax.ctl"
meldas-500.ctl"
mitsubishi_m70.ctl"
osp100m.ctl"
philips-432.ctl"
siem810m.ctl"
siemens_828d.ctl"
siemens_840d.ctl"
siemens-802d.ctl"
thermwood_9100sc2.ctl"
tosnuc-888.ctl"
We have a Router 2600 Pro and we use Solidworks and the CAM add in. In the CAM add in I need to select the correct post processor, does anyone know which is correct for this machine? The standard list available to me in Solidworks is listed below. Or if anyone has the correct .ctl file they could send me, that would be great.
yasnac.ctl"
acramatic-2100.ctl"
allenbradley-8400.ctl"
anilam 1100.ctl"
anilam_6000m.ctl"
biesse-rover23.ctl"
bostomatic.ctl"
brother-c720.ctl"
centurion-6.ctl"
dialog3.ctl"
dialog4.ctl"
fadalcnc.ctl"
fagor8070.ctl"
fanuc10m.ctl"
fanuc11m.ctl"
fanuc16m.ctl"
fanucom.ctl"
haas_vf3.ctl"
heidenhain_itnc426.ctl"
hh_itnc_530.ctl"
hurcokm3.ctl"
mach_iii.ctl"
mach_iii_g54.ctl"
mazakm32.ctl"
mazak-matrix-3ax.ctl"
meldas-500.ctl"
mitsubishi_m70.ctl"
osp100m.ctl"
philips-432.ctl"
siem810m.ctl"
siemens_828d.ctl"
siemens_840d.ctl"
siemens-802d.ctl"
thermwood_9100sc2.ctl"
tosnuc-888.ctl"