Guides to design & manufacture of F1 / Co2 Balsa racing cars

Help with Solidworks Education Edition and the F1 In Schools free version. Tips, advice and curriculum

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Guides to design & manufacture of F1 / Co2 Balsa racing cars

Post by Denford Admin » Thu 07 Jan , 2010 10:30 am

This guide shows how to manufacture F1 R-type cars from a 3D design, using Denford supplied software.
Check the http://www.f1inschools.co.uk website for more recent information, design tutorials and rules.

http://www.denfordata.com/downloads/f1/ ... esktop.pdf
(11Mb .pdf file)

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Guides to design & manufacture of F1 / Co2 Balsa racing cars

Post by Denford Admin » Thu 07 Jan , 2010 10:53 am

Here also, are some guides to designing the cars in Solidworks (tm)

http://www.denfordata.com/downloads/f1/ ... pe-Car.pdf
http://www.denfordata.com/downloads/f1/ ... v2_ENG.pdf


NB, If you are competing in the F1 In Schools challenge, then please check for the latest rules and regulations...these guides are for reference only and may use sizes and features that are not within current regulations

Post Reply