I get "Incorrect Axis Configuration" connecting to

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

I get "Incorrect Axis Configuration" connecting to

Post by Denford Admin » Fri 24 Feb , 2006 9:56 am

Incorrect axis configuration appears after the flash has been erased and downloaded.
This is in version 2.25, machine is RouterV5ProNS

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Fri 24 Feb , 2006 9:57 am

The problem is an incomptability with the latest control firmware, and older Mint files.

SOLUTION: Upgrade to latest version of VR Milling which will fix this problem

Post Reply