Routing just part of a file
Posted: Thu 21 May , 2015 11:01 am
Hi
We have a mould drawn in Inventor, saved as STL which can be exported as and FNC fro Quick CAM Pro and opened in VR Milling.
What we want to do is just mill the aperture in the centre and not the perimeter draft angle.
What is the easiest/correct way to do this please.
I have attached the file.
Thanks
Allan
We have a mould drawn in Inventor, saved as STL which can be exported as and FNC fro Quick CAM Pro and opened in VR Milling.
What we want to do is just mill the aperture in the centre and not the perimeter draft angle.
What is the easiest/correct way to do this please.
I have attached the file.
Thanks
Allan