VR Milling v5.51 released 18th May 2012

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v5.51 released 18th May 2012

Post by Denford Admin » Fri 18 May , 2012 11:33 am

Check here to download the latest version of all software:
http://www.website.denford.ltd.uk/suppo ... -downloads

// 22nd Mar 2012 v5.50 - changes to bigmints to allow vacpump to be turned off when in inc jog mode (as well as jog mode)
// 27th Apr 2012 v5.50 - changes to bigmints for old style-router2600 scaling when machine has all imperial screws.

// 8th May 2012 v5.51 - update to MaxiRouter.55xx.mnt for issues with home switch polarity on the Y and Z axes.
// 18th May 2012 v5.51 - updated mint for 8 station toolchangers - link input 5 for 8 stations

Post Reply