Speed and Feed Pot tick boxes

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Speed and Feed Pot tick boxes

Post by bradders » Wed 08 Feb , 2012 10:44 am

If your machine has Speed and Feed Pots and you have just reinstalled VR Milling and the pots don't work, the you may have to activate the pots manually.
Attachments
Feed and Speed Pots.JPG
Feed and Speed Pots.JPG (46.13 KiB) Viewed 9495 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Speed and Feed Pot tick boxes

Post by Denford Admin » Fri 10 Feb , 2012 9:52 am

This has a good tutorial on selecting and configuring your machine in VR Milling (see the .pdf Selecting and configuring the machine):
viewtopic.php?f=2&t=2903

Post Reply