VRMilling5.exe - Memory could not be read

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
bwsdt
Posts: 2
Joined: Wed 11 Jan , 2012 10:18 am
Hardware/Software: Hardware: Router 2600PRO - S/N HO1751 - Oct 2009
Computer: Dell Optiplex GX520 with Windows XP
Software: VR CNC Milling v5.43, QuickCAMPRO v1.11, QuickCAM 2D design 1.15, Techsoft 2D design v2

VRMilling5.exe - Memory could not be read

Post by bwsdt » Wed 11 Jan , 2012 10:31 am

Sometimes we have the following error message when using VRMilling5 v5.43:
Instruction at 0x0f724b6b" referenced memory at "0x00000028. The memory could not be "read".
Click OK to terminate the program
Click on CANCEL to debug the program
This happened when the user opened up a DXF formatted drawing to select what lines to machine.
We have Router 2600PRO and use a Dell Optiplex GX520
Top
User avatar
Denford Admin
Site Admin
Posts: 3634
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: VRMilling5.exe - Memory could not be read

Post by Denford Admin » Thu 12 Jan , 2012 10:59 am

This could be a .dxf format issue, see the end of this post for advice:
viewtopic.php?f=9&t=3039
Top
Post Reply

Return to “VR Milling - All Versions”