VR Milling v2.14 and MillCAM 2.22 for AES customers

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

VR Milling v2.14 and MillCAM 2.22 for AES customers

Post by Denford Admin » Thu 28 Jan , 2010 11:12 am

VR Milling v2.14 and MillCAM 2.22 for AES customers:

Zip image of the CD supplied to AES customers in the USA:
http://www.denfordata.com/downloads/VRM ... 14-AES.zip (167 Mb)

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: VR Milling v2.14 and MillCAM 2.22 for AES customers

Post by Steve » Thu 28 Jan , 2010 12:31 pm

AES Supplied MicroMill and MicroTurn machines into the US Market as an OEM supplier.

They wrote curriculum to be used with these machines which was written around VR Milling 2 and MillCAM Designer 2.22

As a result when the software was updated some of the curriculum screenshots were out of date.

AES Made the decision to continue supplying the older version of software as the curriculum matched perfectly.

All these machines were supplied with DENSTEP control cards as the NextMove card will not run with the older version of VR Milling 2


AES users who wish to use the AES curriculum should download the version of software supplied in this thread.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: VR Milling v2.14 and MillCAM 2.22 for AES customers

Post by Steve » Thu 28 Jan , 2010 12:33 pm

If you have lost your software but still have it installed on an older PC follow this link to recover the licence key.

viewtopic.php?f=9&t=2543&p=9260&hilit=l ... ware#p9260

Post Reply