I get the error message
"Specified Module Cannot Be Found"
When running VR Milling Ver 5.19 trying to connect to a real machine. It worked originally when it was first installed on all 3 networked PC's
Error message "Specified Module Cannot Be Found"
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Error message "Specified Module Cannot Be Found"
Last edited by bradders on Fri 09 Nov , 2007 10:48 am, edited 1 time in total.
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
It could be that following files have become unregistered
MILServer5000.exe
MintControls5023.ocx
MintControls5118.ocx
MintControls5224.ocx
MintControls5232.ocx
To register these files manually look at the following post
viewtopic.php?t=1093&highlight=ocx
MILServer5000.exe
MintControls5023.ocx
MintControls5118.ocx
MintControls5224.ocx
MintControls5232.ocx
To register these files manually look at the following post
viewtopic.php?t=1093&highlight=ocx