Datum Offset

Submit any comments, issues or requests relating to the use of VR Milling Version 5 and 2

Moderators: Martin, Steve, Mr Magoo

Post Reply
Ansel
Posts: 5
Joined: Mon 13 May , 2013 15:39 pm
Hardware/Software: VMC 1300 PRO

QUICK CAM 2D
VR MILLING V5
QUICK CAM PRO

Datum Offset

Post by Ansel » Sat 24 Mar , 2018 17:59 pm

Hi Everybody.

I have some questions about the Part Datum Offset. We have a VMC 1300 Pro. A Sinumerik 808D the Part Datum Offset is saved in G54 code. The VMC you saved the part datum in the tool offset editor (work offset i think). But when I´ve seen the Quick Cam 2D DEsign's G Code, I have not seen a G54 in the G code or another one (G55, etc) at the VR Milling's editor.


My questions is that the work offset is like a g54 code, but you don't have to write it in the G code that you play in the Real Machine or how it works?

I'm sorry for my bad english and I appreciate your help.

Post Reply