MasterCAM post processor files

Anything to do with configuring CAM systems and Post Processors to run on different CNC machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

MasterCAM post processor files

Post by Denford Admin » Wed 24 Jan , 2007 16:54 pm

These .pst post processer files will enable you to create suitable G-code programs for our older range of machines

Denford generic mill:
http://www.denfordata.com/downloads/usa ... enmill.pst

Denford generic lathe:
http://www.denfordata.com/downloads/usa ... enturn.pst

Denford Router:
http://www.denfordata.com/downloads/usa ... router.pst

Denford Novamill:
http://www.denfordata.com/downloads/usa ... vamill.pst

Denford Novaturn:
http://www.denfordata.com/downloads/usa ... vaturn.pst

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Wed 24 Jan , 2007 16:57 pm

Some more info...

If you are a Mastercam user, these posts can be used to generate CNC programs for Denford machines.
These MasterCam post are for older (> 5 years ?) versions of Mastercam.
Please contact MasterCam directly for a more current version of the post.
Please refer to your Mastercam documentation for help.

All Mastercam post files end with a .pst extension and should be copied into the Mastercam directory.

cadcam
Posts: 2
Joined: Mon 10 Mar , 2008 2:56 am
Location: Cali, US

Post by cadcam » Mon 10 Mar , 2008 2:59 am

Denford Admin wrote:Some more info...

If you are a Mastercam user, these posts can be used to generate CNC programs for Denford machines.
These MasterCam post are for older (> 5 years ?) versions of Mastercam.
Please contact MasterCam directly for a more current version of the post.
Please refer to your Mastercam documentation for help.

All Mastercam post files end with a .pst extension and should be copied into the Mastercam directory.
There is suppose to be a TXT file that goes with all .PST files. due you have these?
I will review updating the mill post to Mastercam X series and see how they work and post back.
Cadcam-your mastercam support

cadcam
Posts: 2
Joined: Mon 10 Mar , 2008 2:56 am
Location: Cali, US

Post by cadcam » Mon 10 Mar , 2008 3:12 am

I took the post file updated to MastercamX2 or higher. created a quick path posted with no issues.
I need some one to test and see that it works ok on there machine or at least review the code to see if there are issues.

Thanks cadcam. this post update will only work in X2 and higher. if you have a lower version and need this for that version let me know by posting here.

I forgot to mention this contains the .pst and a control def and machine def.
Attachments
DenfordmillMCX2.zip
(11.21 KiB) Downloaded 1275 times
Cadcam-your mastercam support

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: MasterCAM post processor files

Post by Steve » Tue 26 Jan , 2010 10:14 am

Visit the following site to get MasterCAM post processor files for a range of Denford machines.

http://www.mastercam.com/TeachersStuden ... fault.aspx

cbquick
Posts: 6
Joined: Fri 08 Jan , 2010 9:55 am

Re: MasterCAM post processor files

Post by cbquick » Tue 26 Jan , 2010 15:00 pm

Which post would be best for a Microturn Lathe? Thank you for posting these.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: MasterCAM post processor files

Post by Steve » Tue 26 Jan , 2010 16:54 pm

It will be the Generic Lathe:

Denford generic lathe:
http://www.denfordata.com/downloads/usa ... enturn.pst


If you have a newer version of masterCAM use any Denford Lathe post.

cbquick
Posts: 6
Joined: Fri 08 Jan , 2010 9:55 am

Re: MasterCAM post processor files

Post by cbquick » Tue 26 Jan , 2010 17:00 pm

Great thank you

Post Reply