Denford Software & Machines

Denford Software & Machines

  
 

Denford Software & Machines

Welcome to the Denford CAD CAM CNC forum


 
It is currently Wed 08 Sep , 2010 10:38 am

View unanswered posts | View active topics


Board index » CAD / CAM Software » Post Processors

All times are UTC [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Denford Admin
 Post subject: MasterCAM post processor files
PostPosted: Wed 24 Jan , 2007 16:54 pm 
Offline
Site Admin
User avatar

Joined: Fri 10 Feb , 2006 12:40 pm
Posts: 2130
Location: Sunny Brighouse Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
These .pst post processer files will enable you to create suitable G-code programs for our older range of machines

Denford generic mill:
http://www.denfordata.com/downloads/usa ... enmill.pst

Denford generic lathe:
http://www.denfordata.com/downloads/usa ... enturn.pst

Denford Router:
http://www.denfordata.com/downloads/usa ... router.pst

Denford Novamill:
http://www.denfordata.com/downloads/usa ... vamill.pst

Denford Novaturn:
http://www.denfordata.com/downloads/usa ... vaturn.pst
Top
 Profile  
 
Denford Admin
 Post subject:
PostPosted: Wed 24 Jan , 2007 16:57 pm 
Offline
Site Admin
User avatar

Joined: Fri 10 Feb , 2006 12:40 pm
Posts: 2130
Location: Sunny Brighouse Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Some more info...

If you are a Mastercam user, these posts can be used to generate CNC programs for Denford machines.
These MasterCam post are for older (> 5 years ?) versions of Mastercam.
Please contact MasterCam directly for a more current version of the post.
Please refer to your Mastercam documentation for help.

All Mastercam post files end with a .pst extension and should be copied into the Mastercam directory.
Top
 Profile  
 
cadcam
 Post subject:
PostPosted: Mon 10 Mar , 2008 2:59 am 
Offline

Joined: Mon 10 Mar , 2008 2:56 am
Posts: 2
Location: Cali, US
Denford Admin wrote:
Some more info...

If you are a Mastercam user, these posts can be used to generate CNC programs for Denford machines.
These MasterCam post are for older (> 5 years ?) versions of Mastercam.
Please contact MasterCam directly for a more current version of the post.
Please refer to your Mastercam documentation for help.

All Mastercam post files end with a .pst extension and should be copied into the Mastercam directory.

There is suppose to be a TXT file that goes with all .PST files. due you have these?
I will review updating the mill post to Mastercam X series and see how they work and post back.

_________________
Cadcam-your mastercam support

Top
 Profile  
 
cadcam
 Post subject:
PostPosted: Mon 10 Mar , 2008 3:12 am 
Offline

Joined: Mon 10 Mar , 2008 2:56 am
Posts: 2
Location: Cali, US
I took the post file updated to MastercamX2 or higher. created a quick path posted with no issues.
I need some one to test and see that it works ok on there machine or at least review the code to see if there are issues.

Thanks cadcam. this post update will only work in X2 and higher. if you have a lower version and need this for that version let me know by posting here.

I forgot to mention this contains the .pst and a control def and machine def.


Attachments:
DenfordmillMCX2.zip [11.21 KiB]
Downloaded 130 times

_________________
Cadcam-your mastercam support
Top
 Profile  
 
Steve
 Post subject: Re: MasterCAM post processor files
PostPosted: Tue 26 Jan , 2010 10:14 am 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Tue 21 Feb , 2006 16:15 pm
Posts: 763
Location: Denford UK
Visit the following site to get MasterCAM post processor files for a range of Denford machines.

http://www.mastercam.com/TeachersStuden ... fault.aspx
Top
 Profile  
 
cbquick
 Post subject: Re: MasterCAM post processor files
PostPosted: Tue 26 Jan , 2010 15:00 pm 
Offline

Joined: Fri 08 Jan , 2010 9:55 am
Posts: 6
Which post would be best for a Microturn Lathe? Thank you for posting these.
Top
 Profile  
 
Steve
 Post subject: Re: MasterCAM post processor files
PostPosted: Tue 26 Jan , 2010 16:54 pm 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Tue 21 Feb , 2006 16:15 pm
Posts: 763
Location: Denford UK
It will be the Generic Lathe:

Denford generic lathe:
http://www.denfordata.com/downloads/usa ... enturn.pst


If you have a newer version of masterCAM use any Denford Lathe post.
Top
 Profile  
 
cbquick
 Post subject: Re: MasterCAM post processor files
PostPosted: Tue 26 Jan , 2010 17:00 pm 
Offline

Joined: Fri 08 Jan , 2010 9:55 am
Posts: 6
Great thank you
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » CAD / CAM Software » Post Processors

All times are UTC [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 4.002s | 14 Queries | GZIP : Off ]