BBC Starmill Software

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

BBC Starmill Software

Post by Denford Admin » Fri 11 Sep , 2009 8:54 am

Thanks to alastairseggie for this info:

BBC Stuff

I use beeb em http://www.mkw.me.uk/beebem/BeebEm411.exe as it can emulate a master which is what I have.

Use Xferhttp://www.g7jjf.com/progs/xfer51a.zip to transfer from BBC with 5.25 disk to a PC
OR
Use Omnidiskhttp://www.shlock.co.uk/Utils/OmniDisk.zip on a PC with a 5.2

This gets the disk in to the PC then make an immage using Omnidisk or from XFER use BBC Explorerhttp://bbc.nvg.org/util/BBCExplorer-2.01.zip. BBC explorer can also extract files form immages or combine files to make an immage.

Roms can be extracted using readrom or an eprom programmer (which I have).

Attached are the disk immages and the rom but they are untested Once I get everything working i will tru extracting back to 5.25 and see if they work. They do work on the emulator.

Have fun
Attachments
Starmill BBC Software.zip
(84.51 KiB) Downloaded 750 times

Post Reply