Baldor eurocard schematic and 96 way pinout

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3593
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Baldor eurocard schematic and 96 way pinout

Post by Denford Admin » Tue 26 May , 2009 10:05 am

Baldor eurocard schematic and 96 way pinout:
Attachments
baldor-eurocard-schematic-and-pinout.pdf
(633.11 KiB) Downloaded 2811 times

bpmsl
CNC Expert
CNC Expert
Posts: 141
Joined: Mon 16 Nov , 2009 10:00 am

Re: Baldor eurocard schematic and 96 way pinout

Post by bpmsl » Fri 06 Jan , 2012 17:20 pm

Thanks but the a/c/b table and page 5 onlly discusses stepper 0 to 2 does that mean there is no channel number 3 for a 4th stepper axis?

bpmsl
CNC Expert
CNC Expert
Posts: 141
Joined: Mon 16 Nov , 2009 10:00 am

Re: Baldor eurocard schematic and 96 way pinout

Post by bpmsl » Fri 06 Jan , 2012 17:21 pm

Or am i looking at getting using the option IO lines?

Cheers
Barry

User avatar
Denford Admin
Site Admin
Posts: 3593
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Baldor eurocard schematic and 96 way pinout

Post by Denford Admin » Fri 06 Jan , 2012 17:28 pm

Yep you're right sorry :oops: - we must have used that sandwich board just to tap off the X,Y and Z step+direction in order to use bigger stepper drives (before Baldor fitted an IDC connector with all 4 axes on the top board for us)

Post Reply