New TDS 1 LS owner

Manuals, Documents and Software downloads related to Denford CNC Machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
De-El
Posts: 8
Joined: Tue 02 Apr , 2019 15:50 pm
Hardware/Software: Viceroy TDS 1 LS

New TDS 1 LS owner

Post by De-El » Tue 02 Apr , 2019 16:10 pm

Good day,

I am a new owner of a TDS 1 LS.
It dates from around the 60's and was used in a school but was in storage for quite some time.
Sadly some parts has gone missing over the years.
I will be stripping it down, rebuilding and restoring it to its former glory for use in my workshop.

For the moment I am looking for the following drawings. I do hope the are available.
ML 105-402
ML 105-403

Many thanks
D

Andy B
CNC Guru
CNC Guru
Posts: 329
Joined: Mon 20 Nov , 2006 18:19 pm
Hardware/Software: 280 VS lathe, Denford Senior E-type mill, Senior Major Universal Mill
Location: East Midlands, UK

Re: New TDS 1 LS owner

Post by Andy B » Wed 03 Apr , 2019 14:14 pm

Note to any future readers - All inquiries for drawings related to manual lathes are best put on the Viceroy page - here.

They'll be noticed more easily there!

Andy

Post Reply