Hello .
A while ago I acquired the remains of one of these machines , which the previous owner had used some of the parts for another project - mainly the 6 jaw chuck and compound / swivel slide assembly.
I am hoping to restore / reconstruct this machine for use in my home workshop
A lot of drawings and the Parts List have been posted on here by Andy B which will be very useful, but there are several parts for which the original drawings do not now appear to exist.
My question is : are any drawings with someone else apart from Andy B and does anyone have or know of one of these machines I can have a look at and make a few sketches to reverse engineer what I am missing ?
Any suggestions would be much appreciated ! ...............................
Thanks.
MARK
VICEROY DRILL SHARPENING MACHINE TDS 29
Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.
Moderators: Martin, Steve, Mr Magoo
Return to “User Stories / Projects / Courseware”
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures