Page 1 of 1

Retrofitting Spindle Digital RPM meter to a Viceroy lathe

Posted: Thu 09 Apr , 2015 10:36 am
by dazz
Hello

I found a Chinese supplier of cheap digital tachometers specifically designed for machine tool applications.
The trigger 1 pulse per revolution and measure the period between pulses. This means good update times even at low rpm.

They are available in red and blue. I fitted a blue one to the Viceroy to match the colour scheme.

I was able to modify an existing bushing on the spindle to fit a trigger magnet. The bushing retains the rotating components on the spindle and is not loaded.

I was able to mount the sensor on a bracket within the headstock.

Re: Retrofitting Spindle Digital RPM meter to a Viceroy lath

Posted: Fri 07 Apr , 2017 12:03 pm
by dazz
Hi
Here is the finished control panel.