Model Engineer Workshop : Cross slide copier
Posted: Mon 22 Apr , 2013 5:13 am
Hi
The No. 202 May 2013 edition of Model Engineer Workshop magazine includes an article on a copier attachment for a Denford Viceroy lathe (but easily adaptible to any other lathe).
If you already have a Denford copy/taper attachment, this is an easy accessory to make and adds useful capability.
If you don’t have the Denford copy/taper attachment, it would be straight forward to reproduce both attachments.
If the lathe looks familiar, it’s probably because you have seen it on this forum.
The No. 202 May 2013 edition of Model Engineer Workshop magazine includes an article on a copier attachment for a Denford Viceroy lathe (but easily adaptible to any other lathe).
If you already have a Denford copy/taper attachment, this is an easy accessory to make and adds useful capability.
If you don’t have the Denford copy/taper attachment, it would be straight forward to reproduce both attachments.
If the lathe looks familiar, it’s probably because you have seen it on this forum.