Prototype of trophy

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
richgirling
Posts: 17
Joined: Thu 17 Jun , 2010 11:03 am

Prototype of trophy

Post by richgirling » Fri 16 Mar , 2012 16:52 pm

Hi.
Just thought I'd post a picture of a project I'm working on.
We will be having our student awards ceremony at the end of April here at the NSSC. We like to give our winning students some sort of gift to mark their achievement. Other years we have purchased small gifts but money is tight so I was asked if I could make something instead. I managed to find a good source of reclaimed wood, got busy on SolidWorks and 2D Design and came up with this. I am using a 2600 Pro for the machining and a VLS 3.50 for the laser work. I need to make about 10, will post pictures of the finished articles when complete.
Attachments
IMAG0765-1.jpg
IMAG0765-1.jpg (117.13 KiB) Viewed 5951 times

richgirling
Posts: 17
Joined: Thu 17 Jun , 2010 11:03 am

Re: Prototype of trophy

Post by richgirling » Thu 05 Apr , 2012 11:12 am

As promised a photo of the finished products with all laser work done and a couple of coats of Danish oil.
Great active forum you have here! :roll:
Attachments
IMAG0882-1-1.jpg
IMAG0882-1-1.jpg (48.28 KiB) Viewed 5919 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Prototype of trophy

Post by Denford Admin » Wed 11 Apr , 2012 15:28 pm

Thanks for taking the time to show your work...unfortunately most people only come here when they have a problem :roll:

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Prototype of trophy

Post by bradders » Thu 12 Apr , 2012 7:00 am

Great job Rich.

Post Reply