Metal Spinning Tools for a Denford TDS

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
dazz
CNC Expert
CNC Expert
Posts: 243
Joined: Sat 19 Aug , 2006 11:31 am
Hardware/Software: Viceroy TDS 1/1GB lathe, Imperial, stripped down and rebuilt.
Viceroy Taper/Tracer attachment, Shop made cross slide tracer attachment, VSD.
Location: New Zealand

Metal Spinning Tools for a Denford TDS

Post by dazz » Sun 11 Dec , 2011 8:56 am

Hello

I made the spinning wheel and holder for my lathe. The wheel is mounted on ball bearings. It is polished and hardened.

Dazz
Attachments
IMG_1297 (855 x 642).jpg
The wheel being machined on the lathe.
IMG_1297 (855 x 642).jpg (89.04 KiB) Viewed 6230 times
IMG_1303 (800 x 600).jpg
The hardened and polished wheel.
IMG_1303 (800 x 600).jpg (60.56 KiB) Viewed 6230 times
IMG_1304 light (528 x 396).jpg
The finished roller mounted in the holder.
IMG_1304 light (528 x 396).jpg (24.61 KiB) Viewed 6230 times
Regards

Dazz

Post Reply