Here's what I'm making...
Posted: Mon 07 Aug , 2006 20:32 pm
Here's some of the exciting bits
I've made for a CNC router/plasma table. Progres is slow due to other commitments.
I'll tell you what they are.
Top left is one side of an axis temporarily mounted on a lump of steel and below its component parts. It's only 60mm square so fairly compact - to keep weight down. Made on a Fanuc Triac, the rusty bolts (the only hex I had the right size) made on an Easiturn (retrofitted with Geckos and Mach3).
On the right are some 50mm square Ali plumbers blocks/ bearing blocks - whatever you prefer to call them. Entirely made on the Triac
No I didn't make the bearings
And of course a great shed load of swarf
The other half thinks that's all I make
![Image](http://www.denfordata.com/downloads/forum/triac-whizz-4.jpg)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I'll tell you what they are.
Top left is one side of an axis temporarily mounted on a lump of steel and below its component parts. It's only 60mm square so fairly compact - to keep weight down. Made on a Fanuc Triac, the rusty bolts (the only hex I had the right size) made on an Easiturn (retrofitted with Geckos and Mach3).
On the right are some 50mm square Ali plumbers blocks/ bearing blocks - whatever you prefer to call them. Entirely made on the Triac
No I didn't make the bearings
![Laughing :lol:](./images/smilies/icon_lol.gif)
And of course a great shed load of swarf
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Image](http://www.denfordata.com/downloads/forum/triac-whizz-4.jpg)