Golf ball marker project

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Golf ball marker project

Post by Steve » Tue 14 Sep , 2010 18:10 pm

Here is a simple project using both a lathe and a router with metal cutting capability.

The fixture was just screwed down to a sacrifice board and machined in situation. This allowed us to use the template for the fixture as a design template for the milling program.

The turned parts were simply dropped into the fixture and then clamped in position
IMG_3036 (Medium).JPG
IMG_3036 (Medium).JPG (62.73 KiB) Viewed 14120 times
IMG_3038 (Medium).JPG
IMG_3038 (Medium).JPG (67.86 KiB) Viewed 14120 times
IMG_3039 (Medium).JPG
IMG_3039 (Medium).JPG (61.93 KiB) Viewed 14120 times
IMG_3040 (Medium).JPG
IMG_3040 (Medium).JPG (67.62 KiB) Viewed 14120 times
[
IMG_3043 (Medium).JPG
IMG_3043 (Medium).JPG (40.36 KiB) Viewed 14120 times
IMG_3044 (Medium).JPG
IMG_3044 (Medium).JPG (63.94 KiB) Viewed 14120 times
IMG_3045 (Medium).JPG
IMG_3045 (Medium).JPG (57.88 KiB) Viewed 14120 times
IMG_3046 (Medium).JPG
IMG_3046 (Medium).JPG (59.47 KiB) Viewed 14120 times

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Golf ball marker project

Post by Martin » Wed 15 Sep , 2010 11:26 am

Steve,

Did you do these at Denfords????

Post Reply