crosside screw for viceroy tds1/1g.b.

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
rjohnson
Posts: 1
Joined: Tue 03 Feb , 2009 11:38 am

crosside screw for viceroy tds1/1g.b.

Post by rjohnson » Thu 05 Feb , 2009 17:54 pm

I have a Vicerory T.D.S.1/1 GB and i'm desperately in need of a crosslide screwnut. has anyone a secondhand or a wornout nut? that I could use as a pattern, or even a drawing, that I could make a new one the thread is 1/2 inch x 10 tpi, acme Spanner 10
Top
graham4877
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Mon 10 Nov , 2008 10:30 am
Location: newcastle uk

Post by graham4877 » Tue 10 Feb , 2009 21:29 pm

see www.tracytools.com think sell them taps
Top
Pete.
CNC Expert
CNC Expert
Posts: 283
Joined: Wed 07 Jan , 2009 9:46 am
Location: Kent, U.K.

Post by Pete. » Sun 15 Feb , 2009 17:45 pm

What does the 'spanner 10' refer to?
Top
graham4877
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Mon 10 Nov , 2008 10:30 am
Location: newcastle uk

Post by graham4877 » Sun 15 Feb , 2009 19:11 pm

SEE THIS viewtopic.php?t=1918&highlight=280
Top
Post Reply

Return to “User Stories / Projects / Courseware”