Slot Together Eagle

Read what other Denford users are doing with their machines and software.
Educational resources, ideas and courseware.
If you have a Denford related success story, please tell us about it here.

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
WHS
Posts: 11
Joined: Thu 24 Apr , 2008 9:01 am
Location: Lisburn, N.Ireland

Slot Together Eagle

Post by WHS » Thu 08 May , 2008 10:17 am

Hi All, Another slot together puzzle, this time an eagle standing on a globe type thing. Made from 3mm MDF. Included is a picture and the .MCM file.
Attachments
Eagle.JPG
Eagle.JPG (42.56 KiB) Viewed 18477 times
Eagle.zip
(126.73 KiB) Downloaded 1428 times
Chris Dugan
Technology Technician
Wallace High School

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 09 May , 2008 11:20 am

Are you getting any time to do any work in amongst all of this :?: :wink:

Its great to see you using the laser and posting files up for everyone :!:

techy
Posts: 30
Joined: Mon 12 May , 2008 14:00 pm

Post by techy » Fri 16 May , 2008 11:49 am

can this be posted as a dxf file

Matt
CNC Apprentice
CNC Apprentice
Posts: 56
Joined: Sun 13 Aug , 2006 18:21 pm
Location: Kent UK
Contact:

Post by Matt » Fri 16 May , 2008 12:05 pm

I think its the same Eagle that I posted in DXF in the "Fly" post. Look a few posts previous.
Architectural Model Maker www.matthewwood.co.uk

User avatar
WHS
Posts: 11
Joined: Thu 24 Apr , 2008 9:01 am
Location: Lisburn, N.Ireland

Post by WHS » Fri 16 May , 2008 13:53 pm

Yes it is the same dxf as Matt posted, but here it is anyway.
Attachments
EAGLE.zip
(39.53 KiB) Downloaded 1258 times
Chris Dugan
Technology Technician
Wallace High School

techy
Posts: 30
Joined: Mon 12 May , 2008 14:00 pm

Post by techy » Fri 16 May , 2008 18:26 pm

thanks guys, off work for a couple of weeks, lucky me eh, will try when i return

loopybec2002
Posts: 3
Joined: Wed 23 Jan , 2013 14:47 pm
Hardware/Software: Tech Soft 2D

Re: Slot Together Eagle

Post by loopybec2002 » Wed 23 Jan , 2013 14:50 pm

Hi all

I am new to this site but not to a laser cutter I have been using it for small projects for over a year and I am currently work in a school in Nottingham. I love this Eagle but I am using Tech 2d Design and it isn't let me open this document. What would be the best program to use to open this or does anybody know of a way to open this is Tech 2D

Thanks in advance.

Rebecca

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Slot Together Eagle

Post by Denford Admin » Wed 23 Jan , 2013 17:23 pm

Have you tried the second file posted ? I think the first is an .mcm (QuickCAM 2D) file and the 2nd eagle.zip file is a .dxf

The .dxf file you should be able to Import into Techsoft.
You may need to scale it up or down depending on what units the .dxf was saved in (.dxf files don't hold the measurement unit, only values. So a size of 23.000 could mean 23mm; 23inches; 23cm; 23miles etc...)

loopybec2002
Posts: 3
Joined: Wed 23 Jan , 2013 14:47 pm
Hardware/Software: Tech Soft 2D

Re: Slot Together Eagle

Post by loopybec2002 » Thu 24 Jan , 2013 10:30 am

I didn't know that I could import it but have now managed to.

Thanks for your help.

Rebecca

Post Reply