Wanted: Baldor F391 board

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
mike dempsey
Posts: 17
Joined: Thu 30 Jul , 2015 13:19 pm
Hardware/Software: microrouter v3 with 2.31
Location: Glenrothes
Contact:

Wanted: Baldor F391 board

Post by mike dempsey » Fri 12 Jan , 2018 13:20 pm

I need a Baldor F391 board in order to get my Microrouter v3 up and running. Can any one help me out.

cheers

Mike

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Wanted: Baldor F391 board

Post by Martin » Sun 14 Jan , 2018 21:46 pm

Hi Mike

I presume that's a Baldor (optimised) orange connector bottom board from a NextStep card?

It may be worth posting a picture.

mike dempsey
Posts: 17
Joined: Thu 30 Jul , 2015 13:19 pm
Hardware/Software: microrouter v3 with 2.31
Location: Glenrothes
Contact:

Re: Wanted: Baldor F391 board

Post by mike dempsey » Mon 15 Jan , 2018 21:31 pm

Hi Martin, yes it is. It turns out that this board was made exclusively for Denford so I can either buy a new one or hopefully get a second hand one if anyone has one that isn't used anymore.
Attachments
denford board.jpg
denford board.jpg (101.08 KiB) Viewed 2881 times

Post Reply