WANTED - Cross slide feedscrew and nut Viceroy 280S

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
JohnC
Posts: 4
Joined: Sun 12 Nov , 2017 8:51 am

WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by JohnC » Tue 28 Nov , 2017 9:43 am

I am after the cross slide feed screw and nut for a Denford Viceroy 280S - which I believe are common to the TDS range. Ideally new, but good used would be fine. Does anyone have these parts or know where I could source them?
Many thanks,
John

pfp
Posts: 24
Joined: Mon 21 Dec , 2015 1:24 am
Hardware/Software: Denford zeroturn Fanuc OT

Re: WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by pfp » Fri 30 Mar , 2018 20:51 pm

Hi John did you have any luck finding one?

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by TDIPower » Sat 31 Mar , 2018 11:13 am

There was a guy on ebay a while ago who was making nuts for various machines, I got one for my Boxford TUD.

Pete

pfp
Posts: 24
Joined: Mon 21 Dec , 2015 1:24 am
Hardware/Software: Denford zeroturn Fanuc OT

Re: WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by pfp » Sat 31 Mar , 2018 20:22 pm

Hi Pete, thanks I do recall seeing something on ebay.
Some 25 years ago I actually converted a colchester student cross slide nut and shaft to fit my viceroy and about 6 years
I had to turn up a new spindle as it had worn.
Phil

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by TDIPower » Sat 31 Mar , 2018 20:39 pm

good work! it has reduced my backlash quite bit but I thing I will need a new screw next time.

Pete

TDIPower
CNC Guru
CNC Guru
Posts: 613
Joined: Tue 29 Apr , 2014 18:38 pm
Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto

Re: WANTED - Cross slide feedscrew and nut Viceroy 280S

Post by TDIPower » Sat 31 Mar , 2018 21:50 pm


Post Reply