For Sale - Lathe ATC suit Orac

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 200
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

For Sale - Lathe ATC suit Orac

Post by Lone_Ranger » Fri 19 May , 2017 0:47 am

I have for sale a WillsonCNC ATC that will fit a Denford Orac Lathe (and some other small lathes)

It is new condition as it has never been fitted to a machine, it was bought for a Denford Orac Lathe, I have sold the Lathe but the buyer didn`t want the ATC so here it is up for grabs.

It has it`s own dedicated power supply unit and wiring instruction and also instructions on how to use it with Mach3 including a tool change Macro.

See attached images, it is a really nicely manufactured compact ATC, I am asking £250 plus postage which is a fair price for such a nice unit.
Attachments
WILLSON ATC UNDERSIDE.jpg
WILLSON ATC UNDERSIDE.jpg (143.3 KiB) Viewed 1781 times
WILLSON ATC PSU-2.jpg
WILLSON ATC PSU-2.jpg (161.09 KiB) Viewed 1781 times
WILLSON ATC PSU.jpg
WILLSON ATC PSU.jpg (155.38 KiB) Viewed 1781 times
WILLSON ATC INSTRUCTIONS.jpg
WILLSON ATC INSTRUCTIONS.jpg (132.46 KiB) Viewed 1781 times
WILLSON ATC FRONT.jpg
WILLSON ATC FRONT.jpg (105.1 KiB) Viewed 1781 times
WILLSON ATC -2.jpg
WILLSON ATC -2.jpg (139.85 KiB) Viewed 1781 times
WILLSON ATC -1.jpg
WILLSON ATC -1.jpg (147.03 KiB) Viewed 1781 times

teserve
Posts: 13
Joined: Wed 12 Dec , 2007 12:30 pm

Re: For Sale - Lathe ATC suit Orac

Post by teserve » Wed 05 Jul , 2017 16:24 pm

Hi,

Do you still have the ATC for sale?

Regards,
Bob

User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 200
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

Re: For Sale - Lathe ATC suit Orac

Post by Lone_Ranger » Wed 05 Jul , 2017 18:02 pm

teserve wrote:Hi,

Do you still have the ATC for sale?

Regards,
Bob
Hello Bob

Yes, I do still have the unit for sale :D

Regards
Rob

teserve
Posts: 13
Joined: Wed 12 Dec , 2007 12:30 pm

Re: For Sale - Lathe ATC suit Orac

Post by teserve » Wed 05 Jul , 2017 21:47 pm

Hi,

Can you please send me your phone number.

Regards,
Bob

teserve
Posts: 13
Joined: Wed 12 Dec , 2007 12:30 pm

Re: For Sale - Lathe ATC suit Orac

Post by teserve » Wed 05 Jul , 2017 22:13 pm

Hi,

I have private message in my inbox from you but there is nothing in the message. I don't know if you sent me your phone but if you have then I did not get it. My phone number is 07854500851 if you want to phone me.

Regards,
Bob

User avatar
Iron-Man
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 28 Feb , 2011 9:40 am
Hardware/Software: Modified NovaTurn with Yaskawa AC Servos +-10V, PathPilot running on a GizmoSphere 1 with Ibob2 PCIE interface that I designed. Denford Triac to be modified with AC Servos.

Re: For Sale - Lathe ATC suit Orac

Post by Iron-Man » Thu 31 May , 2018 18:42 pm

I know that this is a old post, but Lone_Ranger, did you ever sell it?

Iron-Man

User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 200
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

Re: For Sale - Lathe ATC suit Orac

Post by Lone_Ranger » Thu 31 May , 2018 19:29 pm

Iron-Man wrote:I know that this is a old post, but Lone_Ranger, did you ever sell it?

Iron-Man
Hi, no I didn`t sell it, just put it back on the shelf as I was going to buy another Orac and do a full conversion to all modern electrics and CSMIO motion control system but the deal on the lathe fell through so I still have the ATC :) :)

Regards
Rob

User avatar
Iron-Man
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 28 Feb , 2011 9:40 am
Hardware/Software: Modified NovaTurn with Yaskawa AC Servos +-10V, PathPilot running on a GizmoSphere 1 with Ibob2 PCIE interface that I designed. Denford Triac to be modified with AC Servos.

Re: For Sale - Lathe ATC suit Orac

Post by Iron-Man » Thu 31 May , 2018 20:16 pm

Lone_Ranger wrote:
Iron-Man wrote:I know that this is a old post, but Lone_Ranger, did you ever sell it?

Iron-Man
Hi, no I didn`t sell it, just put it back on the shelf as I was going to buy another Orac and do a full conversion to all modern electrics and CSMIO motion control system but the deal on the lathe fell through so I still have the ATC :) :)

Regards
Rob

Lone_Ranger I have no idea of the turret size. Do you know if it is a front or back turret?
Can you provide the dimensions?
I would like to use it as a turret for the NovaTurn if it is not too large.

Thanks,

Iron-Man

User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 200
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

Re: For Sale - Lathe ATC suit Orac

Post by Lone_Ranger » Thu 31 May , 2018 21:55 pm

Hi, it isn`t very big, quite a compact unit, it is a "front" type ATC.

I will go down the Unit tomorrow and get some measurements for you.

Regards
Rob

User avatar
Iron-Man
CNC Apprentice
CNC Apprentice
Posts: 66
Joined: Mon 28 Feb , 2011 9:40 am
Hardware/Software: Modified NovaTurn with Yaskawa AC Servos +-10V, PathPilot running on a GizmoSphere 1 with Ibob2 PCIE interface that I designed. Denford Triac to be modified with AC Servos.

Re: For Sale - Lathe ATC suit Orac

Post by Iron-Man » Fri 01 Jun , 2018 3:39 am

Lone_Ranger wrote:Hi, it isn`t very big, quite a compact unit, it is a "front" type ATC.

I will go down the Unit tomorrow and get some measurements for you.

Regards
Rob
Thanks,

Iron-Man

Calgone
Posts: 9
Joined: Thu 19 Jun , 2014 12:30 pm
Hardware/Software: Solidworks
HSMXpress
Denford Orac
XYZ Milling Machine
Cubex Duo 3D Printer

Re: For Sale - Lathe ATC suit Orac

Post by Calgone » Mon 06 Aug , 2018 9:25 am

Hi,
I know this is a very old post but did you sell the tool changer?
If not do you still wish to sell it?
All the best Calgone

User avatar
Lone_Ranger
CNC Expert
CNC Expert
Posts: 200
Joined: Mon 01 Oct , 2007 15:23 pm
Contact:

Re: For Sale - Lathe ATC suit Orac

Post by Lone_Ranger » Mon 06 Aug , 2018 13:13 pm

Yep, still for sale :D :D

Regards
Rob

robertspark
Posts: 6
Joined: Fri 27 Jul , 2018 19:59 pm
Hardware/Software: Orac / Mach4 / UCCNC
Location: nr Liverpool

Re: For Sale - Lathe ATC suit Orac

Post by robertspark » Wed 08 Aug , 2018 17:27 pm

Bit of a stuck record this I know....

Is it still for sale?

If so, any chance of some details (I've searched for WillsonCNC and all variants and came up with zip!)

Looking for tool sizes (turning and boring pockets)

Centre height?

Bolt centres for mounting plate?

I'm on the cusp of buying a replacement Multifix AA toolpost and various holders for an Orac, and cannot make my mind up about value + benefit of an ATC, Multifix or Aloris (copy) toolpost.

Thanks for your time {dont want to be just another time waster}

Rob
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does

Post Reply