Denford CNC Baruffaldi Lathe Tool Holders

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Denford CNC Baruffaldi Lathe Tool Holders

Post by jamesgates1000 » Wed 04 Jan , 2017 21:03 pm

I have some tool holders to fit the 8 station Baruffaldi turret on the Cyclone and possibly other machine, made from mild steel and chemical blackened. The bore is left undersize so that it can be trued up in the machine. £28 each delivered. Please not these will NOT fit on a 6 station turret.
Chemi Black.jpg
Chemi Black.jpg (702.39 KiB) Viewed 4786 times
I also have some ER16 and ER25 Collet Chucks that I have modified to fit in the above holders. £35 each delivered.
20170104_173913.jpg
20170104_173913.jpg (709.39 KiB) Viewed 4786 times
Last edited by jamesgates1000 on Sat 18 Mar , 2017 16:16 pm, edited 1 time in total.

Taylormade
Posts: 1
Joined: Mon 06 Mar , 2017 17:39 pm

Re: Denford CNC Baruffaldi Lathe Tool Holders

Post by Taylormade » Mon 06 Mar , 2017 17:44 pm

"I have some tool holders to fit the Baruffaldi turret on the Cyclone and possibly other machine, made from mild steel and chemical blackened. The bore is left undersize so that it can be trued up in the machine. £28 each delivered."

Hi James,

Do you have an email. Im interested in purchasing 4 of the tool holders from you.

malutki69
CNC Apprentice
CNC Apprentice
Posts: 52
Joined: Sat 10 May , 2014 22:35 pm

Re: Denford CNC Baruffaldi Lathe Tool Holders

Post by malutki69 » Thu 27 Sep , 2018 21:28 pm

Hello
Im interested in purchasing 4 of the tool holders from you. Regards

Post Reply