FS - Denford Starmill ATC

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

FS - Denford Starmill ATC

Post by andy_con » Wed 10 Feb , 2016 0:03 am

I'm looking to sell my denford starmill ATC.

purchased this machine about 2 years ago on ebay and have never got round to doing anything with it, all my time and money has been spent on my triac.

its in excellent condition, I have cleaned the whole machine, all that came out of the machine was plastic chips. so I suspect its never cut anything other than plastic. ive repainted a lot of the machine with the correct green denford paint, the machine is an excellent example.

this is the latest of the starmill models, fully enclosed.

has a 3 station automatic tool changer, interesting the tool changer doesn't work with denfords software, there is a thread about it on the denford forum. I do have dongles and bits for the denford software which all work. but the machine is screaming out for a mach conversion.

table is in perfect condition with not rush or holes.

takes bt30 tooling

I paid £1500 for the machine so would like to sell the machine for the same.
machine only no tools of vice

I'm located in Essex for collection

if theres no interest it will go on ebay

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

video of machine running

[VIDEO]https://www.youtube.com/watch?v=wC79CXE3CKw[/VIDEO]

andy_con
CNC Expert
CNC Expert
Posts: 188
Joined: Fri 05 Oct , 2012 20:06 pm
Hardware/Software: Triac Vmc with 6 station ATC
Starmills with ATC

Re: FS - Denford Starmill ATC

Post by andy_con » Sun 21 Feb , 2016 14:23 pm

sold

Post Reply