WANTED - Deford Triac ATC In/Out cylinder

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

WANTED - Deford Triac ATC In/Out cylinder

Post by jamesgates1000 » Mon 26 Oct , 2015 11:30 am

I have pneumatic cylinder on on milling machine tool changer that has a leaking internal seal. It works on the outward stroke but air exhausts out of the back valve on the return stroke.

Does anyone know if I could replace the internal seal on this cylinder?

If not does anyone have a spare lying around?

The cylinder is a Joucomatic Isoclair 435 50 438 c 25 A 150 (P max 140psi)

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: WANTED - Deford Triac ATC In/Out cylinder

Post by angel-tech » Tue 27 Oct , 2015 0:27 am

i think the ends are crimped on if so no chance, but the item is replaceable for around £15 upwards.

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: WANTED - Deford Triac ATC In/Out cylinder

Post by jamesgates1000 » Tue 27 Oct , 2015 7:35 am

Hi, I have been quoted £60+p&p, do you a have any recommendations for a cheaper supplier. Thanks

angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: WANTED - Deford Triac ATC In/Out cylinder

Post by angel-tech » Tue 27 Oct , 2015 10:14 am

I managed to get a replacement on ebay for £15, but if you want an original you will pay a lot for it.

jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 87
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Re: WANTED - Deford Triac ATC In/Out cylinder

Post by jamesgates1000 » Tue 17 Nov , 2015 13:11 pm

Thanks for the replies.
Went to my local pneumatic supplier in Bristol(Harrier Pneumatics) and got a Parker PIA-5025MS-0150 as a direct replacement for £64.
ATC is working fine now.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: WANTED - Deford Triac ATC In/Out cylinder

Post by Martin » Tue 17 Nov , 2015 16:33 pm

Thanks for letting us know. Am sure it will help others in the future.

Post Reply