Cyclone power chuck wanted
Moderators: Martin, Steve, Mr Magoo
-
- CNC Apprentice
- Posts: 87
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Cyclone power chuck wanted
If anyone has an cyclone power chuck for sale please let me know. Cheers james
Last edited by jamesgates1000 on Fri 05 Feb , 2016 0:27 am, edited 1 time in total.
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Cyclone power chuck wanted
what d fitting does your lathe have
-
- CNC Apprentice
- Posts: 87
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: Cyclone power chuck wanted
Hi,
thanks for the quick reply. Didnt expect that!
I have just invested in a couple of denford machines, still in the process of getting my workshop wired up to power them, havent had a chance to open the lathe up and have a look at what mounting it is yet.
A power chuck would really help with some of the jobs that I need to do on the machine.
It is a 2001 Cyclone with toolchanger and Fanuc 21i control, the serial number is H00913.
There is just a standard 3 jaw chuck on it at the moment and it doesnt have any of the pneumatic fittings for an air chuck, is it possible to add a power chuck and the fittings to a machine like this?
thanks for the quick reply. Didnt expect that!
I have just invested in a couple of denford machines, still in the process of getting my workshop wired up to power them, havent had a chance to open the lathe up and have a look at what mounting it is yet.
A power chuck would really help with some of the jobs that I need to do on the machine.
It is a 2001 Cyclone with toolchanger and Fanuc 21i control, the serial number is H00913.
There is just a standard 3 jaw chuck on it at the moment and it doesnt have any of the pneumatic fittings for an air chuck, is it possible to add a power chuck and the fittings to a machine like this?
-
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Cyclone power chuck wanted
saying that i think the cyclone is a direct fit chuck, so you'll have to figure out what nose the cyclone has.
-
- CNC Apprentice
- Posts: 87
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: Cyclone power chuck wanted
Been busy so only just had a chance to take the chuck off so I'm resurrecting this post!
The cyclone has an a2-3 nose on it, does anyone have a spare air chuck and associated plumbing for a fanuc cyclone? Or details on where I can get it?
Thanks
The cyclone has an a2-3 nose on it, does anyone have a spare air chuck and associated plumbing for a fanuc cyclone? Or details on where I can get it?
Thanks