Wanted MIRAC tooling

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
Adrian-CNC
Posts: 27
Joined: Fri 04 Oct , 2013 21:14 pm
Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC

Wanted MIRAC tooling

Post by Adrian-CNC » Tue 09 Jun , 2015 21:03 pm

Hi, my MIRAC has a 6 tool changer, but is missing a couple of the wedges for clamping the tools and I've only one internal tool holder block. If anyone one has some spares I'll buy them. It will save the trouble of making more.

please Message me.
Attachments
image.jpg
image.jpg (274.63 KiB) Viewed 4974 times

Adrian-CNC
Posts: 27
Joined: Fri 04 Oct , 2013 21:14 pm
Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC

Re: Wanted MIRAC tooling

Post by Adrian-CNC » Tue 30 Jun , 2015 12:50 pm

If no one has any spares, does anyone have a drawing I could have a copy of?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Wanted MIRAC tooling

Post by Steve » Wed 01 Jul , 2015 16:58 pm

Try looking at this post.

The turret is made in italy and is a Barufaldi 6 station Turret.

You may be able to get parts from the agent



viewtopic.php?f=40&t=2224&p=7842&hilit= ... rret#p7842

Adrian-CNC
Posts: 27
Joined: Fri 04 Oct , 2013 21:14 pm
Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC

Re: Wanted MIRAC tooling

Post by Adrian-CNC » Fri 03 Jul , 2015 11:17 am

Hi All,

I contacted the agent above, it sounds like they might be able to help with the turret, but the tool holding was a Denford design, so I'll try Denford instead.

Adrian-CNC
Posts: 27
Joined: Fri 04 Oct , 2013 21:14 pm
Hardware/Software: Denford Starmill run by MACH 3
Mirac in need of TLC

Re: Wanted MIRAC tooling

Post by Adrian-CNC » Mon 06 Jul , 2015 21:13 pm

Denford replied and can't help any more.

Post Reply