Denford Quatro for Sale
Moderators: Martin, Steve, Mr Magoo
-
blakey235
- Posts: 16
- Joined: Fri 08 Oct , 2010 10:01 am
- Hardware/Software: I have Harrison M250 with Anilam control +Bridgeport interact 1 with Heidenhain 407
just bought Denford Quatro with North East Electronics Control, and I use Edgecam for Programming - Location: Treforest South Wales
- Contact:
Denford Quatro for Sale
For Sale Denford Quatromill with PNC 4 control, ring 07887948902 or e-mail blakey235@sky.com
-
angel-tech
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Denford Quatro for Sale
Bought 
-
Denford Admin
- Site Admin
- Posts: 3634
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Denford Quatro for Sale
Looks like a good machine!
I'd better start searching through the old documents then...
I'd better start searching through the old documents then...
-
angel-tech
- CNC Guru
- Posts: 525
- Joined: Tue 14 Nov , 2006 12:12 pm
- Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3 - Location: Quatroland
Re: Denford Quatro for Sale
anything will help, i've got all the bits already here. This is my second Quatro, The first one is already running on Mach3, with 4m/min rapids and a full z axis conversion that removes the 100mm z axis on the spindle and gives a 500mm ballscrewed z axis with a fixed head.