Wanted Black cabinet locks

Anything to do with buying, selling or sourcing Denford machines, spares or software - please use sensibly!

Moderators: Martin, Steve, Mr Magoo

Post Reply
Rowhill
Posts: 12
Joined: Thu 15 Dec , 2011 12:56 pm
Hardware/Software: 1995 Denford Starmill
smartstep 3

millcam designer v2.2a
Fanuc md
2d design

Wanted Black cabinet locks

Post by Rowhill » Fri 23 Dec , 2011 13:11 pm

Hi someone might be able to help me, i am after a couple of little black locking knobs which are on the black cabinets (mine is a starmill) i have the locks but no keys and health and safety needs mean i have to lock the cabinets so my pupils don't electricute themselves. If not does anyone know where to go to get keys cut from the numbers on the locks?

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1439
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Wanted Black cabinet locks

Post by Steve » Tue 03 Jan , 2012 10:01 am

Most of the cabinets were made by Rittal and they had a standard key.

These can be locked and unlocked using a pair of neadle nose pliars.

Here is a link to the key required.

http://www.rittal.com/products/ArtikelD ... GB&Dom=com

Rowhill
Posts: 12
Joined: Thu 15 Dec , 2011 12:56 pm
Hardware/Software: 1995 Denford Starmill
smartstep 3

millcam designer v2.2a
Fanuc md
2d design

Re: Wanted Black cabinet locks

Post by Rowhill » Tue 03 Jan , 2012 12:46 pm

sadly mine does not! so still asking for help here

User avatar
Denford Admin
Site Admin
Posts: 3636
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Wanted Black cabinet locks

Post by Denford Admin » Tue 03 Jan , 2012 13:25 pm

Can you post a photo ?

Post Reply