57 Years Ago.....

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

57 Years Ago.....

Post by Triac whizz » Fri 22 Dec , 2006 18:48 pm

Late breaking News :o

The cold weather is here and while burning some old model engineer magazines to keep warm I came across this....

sorry it's not scanned too well but you get the gist of it
Attachments
denfordnews.jpg
denfordnews.jpg (42.37 KiB) Viewed 13445 times
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Sat 23 Dec , 2006 20:50 pm

what was the date on the mag?

I hope you did not burn it?

I would be interested to see a better copy as I worked at Boxford prior to moving to Denford.

User avatar
Triac whizz
CNC Expert
CNC Expert
Posts: 238
Joined: Mon 17 Jul , 2006 21:48 pm
Location: France

Post by Triac whizz » Sat 23 Dec , 2006 22:27 pm

From model Engineer dated december 29th 1949,

burn it? nah kept that page.

Do you know how many mags I have to burn each evening to keep warm around here :lol:
Self Catering Lodges in Central France with covered pool & large grounds
www.la-coterie.com

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Thu 28 Dec , 2006 20:44 pm

I always think that the two companies will one day get back together
(Boxford and Denford) :wink:
Any views or opinions expressed within this transmission are solely those of the author and may not represent the views of Denford Ltd

Post Reply