I bet they never thought we'd still be talking about tape cassettes in 2006
NEE PNC 2c CNC control
Moderators: Martin, Steve, Mr Magoo
- Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
I used to program with them, we had an engraving machine that was used for making small parts and heat embosing plates.
I used to work at Kshoes in Kendal in the jig and die department.
Can't remember the machine though, began with N, maybe newhall or something like that. We had 2 boxes so I didn't have to stand at the machine for a day or so programing it, we then used 2 tapes to record the program as they sometimes failed.
We used dictaphone tapes, seen in another thread that people are having trouble with dictaphone tapes.
Steve
I used to work at Kshoes in Kendal in the jig and die department.
Can't remember the machine though, began with N, maybe newhall or something like that. We had 2 boxes so I didn't have to stand at the machine for a day or so programing it, we then used 2 tapes to record the program as they sometimes failed.
We used dictaphone tapes, seen in another thread that people are having trouble with dictaphone tapes.
Steve
Steve