Andrew Denford

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Andrew Denford

Post by bradders » Thu 23 Apr , 2009 9:02 am

Andrew Denford
Attachments
Andrew Denford.JPG
Andrew Denford.JPG (46.68 KiB) Viewed 12744 times

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Post by Martin » Thu 23 Apr , 2009 9:52 am

Wonder if he still has the smock?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 23 Apr , 2009 10:55 am

Still has his hair, unlike some :lol: :lol: :lol:

User avatar
Mr Magoo
CNC Guru
CNC Guru
Posts: 301
Joined: Tue 21 Feb , 2006 21:45 pm
Location: Brisbane, Australia

Re: Andrew Denford

Post by Mr Magoo » Thu 10 Sep , 2009 23:14 pm

Isn't that a young Harry Hill ???

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Andrew Denford

Post by Denford Admin » Fri 11 Sep , 2009 8:58 am

How about this one of Andrew from (we think) 1984 :lol:
Attachments
amd-1984-only.jpg
amd-1984-only.jpg (26.1 KiB) Viewed 12437 times

Post Reply