Viceroy drill sharpener model tds29 serial number 001

If you've had enough of reading, then look at these pictures of the "good" old days. Machine brochures, magazines etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
ossington
Posts: 1
Joined: Thu 03 Jan , 2008 12:45 pm
Location: nottingham

Viceroy drill sharpener model tds29 serial number 001

Post by ossington » Thu 03 Jan , 2008 13:00 pm

I purchased this machine a few years ago and have not discovered how to use it. Does anyone have the operating instructions?
I would cover any cost involved in supplying the information.
Regards Arthur

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Mon 04 Feb , 2008 18:09 pm

Is this new topic of any use to you ?
viewtopic.php?t=1408

Post Reply