QuickCAM makes a 4x4 challenge spray stencil

A forum for anything to do with QuickCAM 2D Design and LaserCAM 2D Design. Submit advice, examples, problems, feature requests etc..

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

QuickCAM makes a 4x4 challenge spray stencil

Post by Denford Admin » Thu 09 Mar , 2006 13:18 pm

Made this yesterday for the 4x4 in schools team.
Creating design just from the jpg logo was easy 8)

Image

Get the MCM file here to play with it yourself:
http://www.denfordata.com/projectimages/4x4.MCM


For more on the 4x4 in schools challenge, see here:
http://www.4x4inschools.com

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: QuickCAM makes a 4x4 challenge spray stencil

Post by Martin » Mon 02 Sep , 2013 11:49 am

Another topic covering contouring an image.

posting.php?mode=edit&f=1&p=4388

Post Reply